주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame.
[*
black] Insert wisdom hereWhile holding the LCD with one hand, insert the flat end of a spudger between the LCD and tape on the iPad's right side.
[* black] Slide the spudger outward, separating the tape, while gently lifting up on the LCD to pull it away from the tape.
[* icon_note] It may help to twist the spudger, to spread the gap the rest of the way and separate the LCD from the tape
.
[* icon_note] The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame.
[*
black] Insert wisdom hereWhile holding the LCD with one hand, insert the flat end of a spudger between the LCD and tape on the iPad's right side.
[* black] Slide the spudger outward, separating the tape, while gently lifting up on the LCD to pull it away from the tape.
[* icon_note] It may help to twist the spudger, to spread the gap the rest of the way and separate the LCD from the tape
.