주요 콘텐츠로 건너뛰기

#27단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Insert wisdom here.
+[* icon_note] The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.
+[* icon_caution] There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.
+[* black] Lifting from the left side, remove the logic board.
[* icon_reminder] Check all connectors when installing board
[* icon_reminder] Check alignment of [https://d3nevzfk7ii3be.cloudfront.net/igi/MCXjqeVth1oGdxRB.full|rubber dampers|new_window=true]