#1단계의 변경 사항
편집자 Sarah Westberg-
편집 승인됨 완료자 Sarah Westberg
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] Use the Phillips #1 screwdriver to remove the two 3.1mm screws from the LED PCB. | |
| [* black] Lift the LED PCB up with your fingers and flip over revealing the ZIF connector. | |
| + | [* icon_caution] The LED PCB is still tethered to the daughterboard via a ribbon cable so be sure not to yank it out or it could cause damage to the cable or its connectors. |