주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Taylor Dixon- 에 의해 수정

편집 승인됨 완료자 Taylor Dixon

이전
이후
변경 사항이 없습니다

단계 라인

-[* icon_note] In the following steps you'll be cutting through the adhesive that adheres the rear glass panel to the phone.
+[* icon_note] In the following steps you'll be cutting through the adhesive that adheres the rear glass cover to the phone.
+[* red] For reference, the back of the rear glass cover is shown at left. Note the clearance between the edge of the cover and the fragile ribbon cable beside the fingerprint sensor.
+ [* black] Be careful as you slice and pry to the left side of the fingerprint sensor, as seen from the outside of the phone in the third photo.
+ [* icon_caution] Inserting an opening tool more than 3 mm into the phone in this area can damage or tear the fingerprint sensor cable.

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가