물건을 수리하세요 커뮤니티 상점

#4단계의 변경 사항

편집자 Armin Talic-

승인 대기 중

이전
이후
변경 사항 없음

단계 라인

-[* black] Open the UMD slot. With the screen facing towards you, unclip the locks at the bottom right outer-side of the hinge, and the bottom left, inner-side of the hinge.
-[* black] Remove the four newly reveal screws, in any order. If you're afraid of commitment, you might like to assign each screw a number between 1-4, and decide using a random number generator.
-[* black] Place the PSP face up, with the joystick side on the right. There are two lock clips located on the right side of the LCD, unhinge these.
+[* black] Open the UMD slot. With the screen facing towards you, unclip the locks at the bottom right outer-side of the hinge, and the bottom left, inner-side of the hinge. Remove this component.
+[* black] Remove the four newly reveal screws, in any order. If you're afraid of commitment, you might like to assign each screw a number between 1-4, and decide using a random number generator. Remove this component.
+[* black] Place the PSP face up, with the joystick side on the right. There are two lock clips located on the right side of the LCD, unhinge these. Remove this component.