주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

Wouter van der Post- 에 의해 수정

편집 승인됨 완료자 Wouter van der Post

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] Remove the three 6mm T9 Torx screws securing the cover plate.
+[* red] Remove the three 6 mm T9 Torx screws securing the cover plate.
[* yellow] Slightly loosen the rubber knob since it pushes down on the cover plate.
-[* black] Carefully slide the cover plate 1 or 2 mm upwards and remove it from the unit.
+[* black] Slide the cover plate about 1 or 2 mm upwards and remove it from the unit.