주요 콘텐츠로 건너뛰기

#11단계의 변경 사항

Wouter van der Post- 에 의해 수정

편집 승인됨 완료자 Wouter van der Post

이전
이후
변경 사항이 없습니다

단계 라인

[title] Removing disk clamb
[* yellow] It is advisable to grab an old CD and push it half way into the CD-ROM drive until it is visible through the hole marked in the first picture. This will prevent the part that has to be removed in this step to fall down into the unit, with the risk of damaging the laser.
[* black] The metal plate slides forward as shown in the first picture.
[* black] Use a pair of tweezers to very carefully slide forward and then lift up and remove the metal plate together with the white plastic disk.
+[* icon_caution] I did not take the unit apart beyond this level, taking it apart any further might offset the calibration of the laser and damage the unit.