주요 콘텐츠로 건너뛰기

#15 단계의 변경 사항

nickdesign- 에 의해 수정

편집 승인됨 에 의해 Kyle Wiens

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] There are only a few components left around the device casing.
[* black] Last on the midframe is the LCD and its soldered-on cable. Repairability takes takes a hit here, when we have to pull out a [product|IF145-031|heat gun] and [product|IF145-012|metal spudger] to loosen the adhesive securing this cable to the midframe.
[* black] Last on the midframe is the LCD and its soldered-on cable. Repairability takes takes a hit here, when we have to pull out a [product|IF145-031|heat gun] and [product|IF145-012|metal spudger] to loosen the adhesive securing this cable to the midframe.
[* black] The rear case's last component is the button/speaker assembly which is attached to the backing of the battery compartment. A couple of screws and some tape hold it in place.