#4단계의 변경 사항
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* blue] |
|---|---|
| - | [* green] Using a small flat head screwdriver, flip the black latch up 90 degrees |
| + | [* blue] The hard drive ribbon cable is held in place by a black latch on the hard drive. (first picture) |
| + | [* green] Using a small flat head screwdriver, flip the black latch up 90 degrees. (second picture) |
| [* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white part. | |
| [* icon_note] This may be a little difficult to move, so take your time and go easy. |