Skip to main content

#1 단계의 변경 사항

Taylor Catlin- 에 의해 수정

편집 승인됨 에 의해 Taylor Catlin

변경 사항이 없습니다

스텝 라인

[* black] Locate the small slit on the bottom edge of the device between the back and front casings.
[* black] Pop the back case off by inserting your finger and pulling the case away from the phone.
[* icon_note] If necessary (it shouldn't be), use a spudger to pry the back case off.
[* black] Remove the battery by pulling the top edge of the battery down and away from the phone
[* icon_note] If you would prefer, you may use a spudger for this step as well.
[* black] When replacing, put the battery against the top edge of the slot first, then place the rest of the battery in.
[* icon_note] Be sure that the arrow is facing you, and that it is pointing upward.