#1단계의 변경 사항
편집자 Ryan Green-
편집 승인됨 완료자 Ryan Green
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] On the bottom right corner of the mother board, use the tip of the blue plastic opening tool or your fingernail to gently flip-up the grey locking flap of the three ribbon cables. | |
| [* icon_caution] Make sure to only lift the flap and not the connector socket because the socket easily breaks off. | |
| - | [* black] Grab each ribbon cable |
| + | [* black] Grab each ribbon cable and gently pull away from the socket. |
| [* icon_reminder] To reinstall, insert the ribbon cable into the connector and close the flap on the black line. | |
| [* black] Move the ribbon cables away from the motherboard. |