#2단계의 변경 사항
편집자 Michael Papadopolous-
편집 승인됨 완료자 Michael Papadopolous
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Locate the grey metal cover in the top left corner of the backboard. |
|---|---|
| + | [* icon_note] There are two silver screws holding it down. There is also a small bar code on it. |
| + | [* black] Once located use the #0 phillips head screwdriver to remove the 1/8 inch silver screws. |
| + | [* black] Now that the screws are removed carefully use the tweezers to remove the grey over |
| + | [* icon_note] Under the cover you will see one white wire and one black wire. |
| + | [* black] Use the tweezers to pull straight up on each wire to disconnect them from their specialized bracket. |
| + | [* black] Lastly use the tweezers to pull forward on the wires removing them from the plastic guides that hold the wires in place. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가