#2단계의 변경 사항
편집자 Michael Papadopolous-
편집 승인됨 완료자 Michael Papadopolous
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* icon_note] There are two silver screws holding it down. There is also a small bar code on it. | |
| - | [* blue] Use the #0 Phillips head screwdriver to remove the |
| + | [* blue] Use the #0 Phillips head screwdriver to remove the 3.2 mm silver screws. |
| [* black] Now that the screws are removed carefully use the tweezers to remove the grey over | |
| [* icon_note] Under the cover, you will see one white wire and one black wire. | |
| [* black] Use the tweezers to pull straight up on each wire to disconnect them from their specialized brackets. | |
| [* black] Lastly, use the tweezers to pull forward on the wires removing them from the plastic guides that hold the wires in place. |