#3단계의 변경 사항
편집자 Michael Papadopolous-
편집 승인됨 완료자 Michael Papadopolous
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] Use the #0 Phillips head screwdriver to remove the 3.2 mm black screws holding down the cover. | |
| [* black] Now use the tweezers to carefully remove the silver cover from the backboard. | |
| - | [* icon_note] Under the cover, you will see the display cable connected to a rectangular adapter. |
| - | [* black] Wedge the plastic opening tools in between the rectangle and the backboard. |
| - | [* black] Gently pull up disconnecting the adapter from its bracket. |
| + | [* icon_note] Under the cover you will see the display cable fused to a rectangular adapter. |
| + | [* black] Gently wedge the plastic opening tools in between the rectangle and the backboard. |
| + | [* black] Gently pry up disconnecting the adapter with the display cable from its bracket. |
| + | [* icon_note] The display table stays connected to the adapter. |