주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Caleb Mink- 에 의해 수정

편집 승인됨 완료자 Caleb Mink

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Using #1 Phillips screwdriver, remove the two 3mm screws at the bottom of the display panel.
[* black] Using #1 Phillips screwdriver, remove the two 3mm screws at the bottom of the display panel.
[* icon_note] Lift slightly from the top, then pull outwards.
[* black] Flip the display panel around to find a ribbon cable near the center of the bottom of the panel. This cable will have some orange tape wrapped around the connector. Once removed the ribbon cable will simply pull out of the connector.