주요 콘텐츠로 건너뛰기

#7단계의 변경 사항

편집자 Caitlin Feldewerth-

편집 승인됨 완료자 Caitlin Feldewerth

이전
이후
변경 사항 없음

단계 라인

-[* red] Use a Phillips #00 Screwdriver to remove the single 4 mm black screw from beneath the ribbon cable.
-[* orange] Use a Phillips #00 Screwdriver to remove the two 2.5 mm black screws
-[* black] Carefully use your fingers to lift the motherboard off the internal panel.
+[* red] Using a Phillips #00 Screwdriver, remove the single 4 mm black screw from beneath the ribbon cable.
+[* orange] Using a Phillips #00 Screwdriver, remove the two 2.5 mm black screws
+[* black] Using your fingers, carefully lift the motherboard out of the internal panel.