Canon Powershot Pro1 Motherboard Replacement 단계 #2 기록

#2단계의 변경 사항

편집자 Lauryn Maher- 2022년 4월 12일

편집 승인됨 완료자 Lauryn Maher

-	[* red] Using the phillips #000 screwdriver: Remove the two 1.00 mm Phillips #0 screws under the viewfinder, the one screw in the battery compartment, and five screws on the bottom of the camera, and the single screw on the left side of the camera (opposite the battery compartment).
+	[* black] Using the Phillips #000 screwdriver:
+	[* red] Remove the two 1.00 mm Phillips #0 screws under the viewfinder.
+	[* orange] Remove the screw in the battery compartment.
+	[* yellow] Remove the five screws on the bottom of the camera.
+	[* black] Remove the screw on the left side of the camera (opposite the battery compartment).