#2단계의 변경 사항
Walter Galan- 에 의해 수정
편집 승인됨 완료자 Walter Galan
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* black] Remove the following screws securing the battery connector board to the logic board: |
[* red] Two 2.8 mm T6 Torx screws [* orange] One 7.0 mm T7 Torx shouldered screw |
[* red] Two 2.8 mm T6 Torx screws [* orange] One 7.0 mm T7 Torx shouldered screw |