이 단계의 변경 사항
편집자 Kameron Jusseaume-
편집 승인됨 완료자 Kameron Jusseaume
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Remove the 2mm screws on the side of the battery. |
|---|---|
| + | [* black] Use the Phillips #00 screwdriver to remove the 1mm screw holding in the network card |
| + | [* black] Disconnect the network card from the motherboard socket |
| + | [* black] Disconnect the 2 cable connectors from the network card. If the cables are stuck, gently wiggle them until they disconnect |