How to Replace a Front Derailleur 단계 기록

이 단계의 변경 사항

편집자 Victoria Yates- 2019년 12월 4일

편집 승인됨 완료자 Victoria Yates

+	[* black] *Adjust the derailleur limiting screws and cable tightness as needed. *
+	[* black] *''There are two gear limit screws.''* On older derailleurs the low-gear limit is closest to the frame, but some newer models have reversed the screw’s positioning.
+	[* black] To adjust the low-gear limit, first make sure your chain is shifted to the largest sprocket in the rear, and the smallest sprocket in the front. Ideally, you want to set up the inner plate so that it barely clears the chain in the lowest gear.
+	[* black] To adjust the high-gear limit, shift the chain into your highest gear, that is, smallest sprocket in the rear, and the largest sprocket in the front. It prevents the chain from shifting past the largest chain wheel and throwing the chain out into your pedals. Ideally you want the cage to stop just after it clears the chain on the large chain-ring.