주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

koppie007- 에 의해 수정

편집 승인됨 완료자 koppie007

이전
이후
변경 사항이 없습니다

단계 라인

[title] Cut the plastic from the shell
[* black] Cut the plastic from the shell, aligned with red markers.
[* black] Use a cutter to cut the big pieces of plastic.
[* black] Use the cutter again to cut some plastic from the shell. This is required for the LCD to fit properly.
[* icon_note] Only cut the plastic that sticks out! It's possible that the red markers are not 100% accurate.
-[* icon_reminder] First things first, there are 2 GBA models. 32 pin motherboards and 40 pin motherboards, before you order anything, make sure which model you have. The GBA's starting with a 0 it's a 40 pin, if it start with a 1 it's a 32 pin. Please advise Google if you are not sure which model you have.
+[* icon_reminder] First things first, there are 2 GBA models. 32 pin motherboards and 40 pin motherboards, before you order anything, make sure which model you have. The GBA's starting with a 0 is a 40 pin, if it start with a 1 it's a 32 pin. Please advise Google if you are not sure which model you have.