#8 단계의 변경 사항

k3nt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* blue] Using a metal spudger, push back on the four clips holding the LCD screen to the logic board.
[*
black] Insert wisdom hereNext gradually pull the screen away from the board so that none of the clips are engaged.
[* black] Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen
.
[* blue] Using a metal spudger, push back on the four clips holding the LCD screen to the logic board.
[*
black] Insert wisdom hereNext gradually pull the screen away from the board so that none of the clips are engaged.
[* black] Last, use a metal spudger to push back on the clip locking in the ribbon cable for the screen
.