#7단계의 변경 사항
편집자 Sarah Westberg-
편집 승인됨 완료자 Sarah Westberg
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Put the trucks of the board back on by first inserting the screws back in from the top. | |
| [* black] Then fit the trucks to align with the screws and place nuts over area where the screws are overlapping. | |
| - | [* black] Tighten the nuts using the socket and the screws with the screwdriver. |
| - | [* icon_note] 8x25mm Phillips |
| + | [* black] Tighten the nuts using the socket and the screws with the Phillips #2 screwdriver. |
| + | [* icon_note] 8x25mm Phillips #2 screws and 8x3/8 Nuts |