주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Zach Yasuda- 에 의해 수정

편집 승인됨 완료자 Zach Yasuda

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Flip the device overover.
[* red] Locate ribbon cable with purple tab and connector with one black and one white wire
[* black]
Pull out ribbon cable, holdcable by holding the purple plastic tabtab.
[* blackorange] Pull out connector with the black and white wire, holdwire by holding plastic tabtab.
[* black] Flip the device overover.
[* red] Locate ribbon cable with purple tab and connector with one black and one white wire
[* black]
Pull out ribbon cable, holdcable by holding the purple plastic tabtab.
[* blackorange] Pull out connector with the black and white wire, holdwire by holding plastic tabtab.

이미지 1

이전 버전

새로운 버전