주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

hackerb9- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] DisconnectPeel off the camera cable by pulling the male end straight away from its socket.
[* icon_caution] There is a
small piece of hard plastic stuck to the logic board that stops the camera cable from falling out of its socket. Be sure to peel this off first or you could damage(See detailed image 1).
[* black] Disconnect
the connectors.
[*
camera cable by pulling the male end '''horizontally''' from its socket. (See detailed image 2).
[*
icon_note] Make sure to pull the connector parallel to the face of the logic board and toward the optical drive, notdrive.
[* icon_caution] Do '''not''' pull
straight up from its socketas that will destroy the connector.
[* black] DisconnectPeel off the camera cable by pulling the male end straight away from its socket.
[* icon_caution] There is a
small piece of hard plastic stuck to the logic board that stops the camera cable from falling out of its socket. Be sure to peel this off first or you could damage(See detailed image 1).
[* black] Disconnect
the connectors.
[*
camera cable by pulling the male end '''horizontally''' from its socket. (See detailed image 2).
[*
icon_note] Make sure to pull the connector parallel to the face of the logic board and toward the optical drive, notdrive.
[* icon_caution] Do '''not''' pull
straight up from its socketas that will destroy the connector.

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가