주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#2단계의 변경 사항

Casey Goodings- 에 의해 수정

편집 거부됨 완료자 Evan Noronha

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Disconnect the camera cable by pulling the male end straight away from its socket.
[* icon_caution] There is a small piece of hard plastic stuckattached to the logic board that stops the camera cable from falling out of its socket. Be sure to peel this off first or you could damage the connectors.
[* icon_caution] There is a small piece of hard plastic stuckattached to the logic board that stops the camera cable from falling out of its socket. Be sure to peel this off first or you could damage the connectors.
[* icon_note] Make sure to pull the connector parallel to the face of the logic board and toward the optical drive, not straight up from its socket.