주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Chris De Laet- 에 의해 수정

편집 승인됨 완료자 Chris De Laet

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the rear panel from the crate (the rear, left and right panels are identical)
[* black] Install the rear panel onto the floor
-[* black] Align the rear panel precisely over the screw holes in the floor
-[* black] Insert the M8 bolts from the bottom up through the floor
-[* black] Tighten the four bolts
+[* black] Align the rear panel precisely over positioning holes in the floor and lower it carefully until it clicks into place.
+[* black] WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.

이미지 2

이전 버전

새로운 버전

이미지 3

삭제됨