메인 콘텐츠로 스킵하기

#3 단계의 변경 사항

Chris De Laet- 에 의해 수정

편집 승인됨 에 의해 Chris De Laet

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] RemoveInstall the rear panel fromonto the crate (the rear, left and right panels are identical)floor panel
[* black] Install theicon_note] Note: The rear panel ontocan be recognized because there is a small grey flat cable coming out of the floortop.
[* black] RemoveInstall the rear panel fromonto the crate (the rear, left and right panels are identical)floor panel
[* black] Install theicon_note] Note: The rear panel ontocan be recognized because there is a small grey flat cable coming out of the floortop.
[* black] Align the rear panel precisely over positioning holes in the floor and lower it carefully until it clicks into place.
[* black] Use the four shorter screws to fix the panel onto the floor.
[* icon_caution]
WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.
[* black] Use the four shorter screws to fix the panel onto the floor.
[* icon_caution]
WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.