주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Chris De Laet- 에 의해 수정

편집 승인됨 완료자 Chris De Laet

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Remove the rear panel from the crate (the rear, left and right panels are identical)
-[* black] Install the rear panel onto the floor
+[* black] Install the rear panel onto the floor panel
+[* icon_note] Note: The rear panel can be recognized because there is a small grey flat cable coming out of the top.
[* black] Align the rear panel precisely over positioning holes in the floor and lower it carefully until it clicks into place.
-[* black] WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.
+[* black] Use the four shorter M8 bolts to fix the panel onto the floor.
+[* icon_caution] WARNING! Be careful not to tilt over the panels. The system is only stable after the roof has been installed.