#20단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_note] ''At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next three steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.'' |
|---|---|
| + | [* black] If you've already verified that your iMac is working correctly and are ready to seal it up, skip to Step 19. |
| + | [* black] Gently insert the display data connector into its socket on the logic board. Be sure to press it straight into the socket, and insert it completely. |
| + | [* black] Flip the display data connector lock down onto the socket. |
| + | [* black] Insert the display power connector into its socket on the logic board. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가