Gigabyte AERO 15-X8 Thermal Paste Replacement 단계 #7 기록

#7단계의 변경 사항

편집자 Kyle Smith- 2021년 10월 18일

편집 승인됨 완료자 Kyle Smith

	[* black] Using calipers or a precision ruler, measure the dimensions of all the power supply chips.
	[* black] Cut the thermal pad sheet according to the measurements and place the pieces on top of the chips.
	[* red] Use 1-1.5 mm thermal pad thickness on grey chips.
-	[* orange] (Use 2-2,5 mm thermal pad thickness on the 8 flat chips.) Edit: be careful with 2-2,5 mm thermal pads as they might be too thick. Try to check the thickness of the previous pads / intact strips on chips of equal height. The only place where thicker pads fit well are the two outer, shorter chips in the top row of chips marked red in the image.
+	[* orange] Use 2-2,5 mm thermal pad thickness on the 8 flat chips.
+	[* icon_note] Try to check the thickness of the original pads. If 2-2,5 mm thermal pads are too thick, you may need to use thinner pads.