#9단계의 변경 사항
편집자 Jack Freeman-
편집 승인됨 완료자 Jack Freeman
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Using a Phillips |
|---|---|
| - | [* red] The seven 6mm Phillips |
| - | [* orange] Three 7.5mm Phillips |
| + | [* black] Using a Phillips #2 screwdriver, secure the fan assembly in place. |
| + | [* red] The seven 6mm Phillips #2 screws are spring-loaded and require moderate pressure to screw in. |
| + | [* orange] Three 7.5mm Phillips #2 screws. |
| [* icon_note] Make sure to alternate between sides while securing the fan assembly. Securing all screws in one area before going to the opposite one may lead to an uneven pressure during assembly that may displace the thermal paste. | |
| [* black] Reconnect the fan wires by clicking them into the receptors. |