#3단계의 변경 사항
편집자 Austin Blakely-
편집 승인됨 완료자 Austin Blakely
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Locate the 6mm Hex screw that is attached to the rubbing brake pad |
|---|---|
| - | [* black] Using a 6mm Hex Key rotate the 6mm Hex screw counter-clockwise until the brake can be moved easily |
| - | [* icon_caution] Make sure not to unscrew completely otherwise the brake could fall off completely |
| + | [* black] Loosen the 6mm hex screw that is holding the noisy brake to the frame. |
| + | [* icon_note] Make sure not to remove the bolt completely. |