주요 콘텐츠로 건너뛰기

#8단계의 변경 사항

rwong05- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Pull up onyellow] The right side of bottom case should separate from the screen casing to separatetop case when you remove the sliding shaft hingeshaft.
[* black] Pull up onyellow] The right side of bottom case should separate from the screen casing to separatetop case when you remove the sliding shaft hingeshaft.
[* icon_caution] Do not pull up too far or the wire hinge may be damaged.
[* red] PullSlide the screen casingtop case to the right and up to separate the wire hinge and release the joint.
[* black] Weave the wires and ribbons through the wire hinge to completely separate the screentop and bottom casings.
[* red] PullSlide the screen casingtop case to the right and up to separate the wire hinge and release the joint.
[* black] Weave the wires and ribbons through the wire hinge to completely separate the screentop and bottom casings.

이미지 1

이전 버전

새로운 버전