#1단계의 변경 사항
편집자 Jerry F Nerviano-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Unscrew the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shown. |
|---|---|
| - | [* black] Carefully unplug the tan connector from the socket. Do not pull on the wires (as shown), but pull on the connector itself. |
| + | [* icon_note] The controller connector panel can be pulled up (GENTLY) from the main unit and laid down, as depicted. This is not strictly required, but may provide more maneuverability inside the case. |
| + | [* black] Remove the two screws holding the fan assembly onto the unit using a Philips #2 screwdriver as shown. |
| + | [* black] Carefully unplug the fan connector from the socket. |
| + | [* icon_caution] DO NOT pull the wires to disconnect the fan! The picture shown is intended only to illustrate the connector in question. Pulling the wires may damage the connector, the wires, or even the PCB. |