주요 콘텐츠로 건너뛰기

#9단계의 변경 사항

편집자 Austin Blakely-

편집 승인됨 완료자 Austin Blakely

이전
이후
변경 사항 없음

단계 라인

-[* black] Once you fully attach the patch turn the jeans right side out and locate the hole again.
-[* black] Insert your needle from the inside of the jeans about 1/2 inch above the too of the hole and 1/2 inch to one side of the hole.
+[* black] Now that the patch is fully attached, turn the jeans right side out.
+[* black] Insert your needle from the inside of the jeans about 1/2 inch above the top of the hole and 1/2 inch to one side of the hole.
[* black] Pull the thread tight and insert the needle again on the other side of the hole about 1/2 and inch in the opposite direction.
[* black] This should create a stitch or a line of thread across the top of the hole.
-[* black] Repeat that process to create enough stitches to cover the entire length of the hole.
+[* black] Repeat the process to create enough stitches to cover the entire length of the hole.