Skip to main content

#1 단계의 변경 사항

Joseph Goodwin- 에 의해 수정

편집 승인됨 에 의해 Joseph Goodwin

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Locate the USB in/out component on your Lyra X2400. TheIf you are having difficulty locating this component the picture onto the left will helpshoe you locate this componentwhere it is located.
[* black] Start using solder/desolder tools to remove the USB in/out.
[* black] Once removed replace it with the new working USB in/out.
[* black] Use the soldering tools to reattach the component back to the main logic board
.
[* black] Locate the USB in/out component on your Lyra X2400. TheIf you are having difficulty locating this component the picture onto the left will helpshoe you locate this componentwhere it is located.
[* black] Start using solder/desolder tools to remove the USB in/out.
[* black] Once removed replace it with the new working USB in/out.
[* black] Use the soldering tools to reattach the component back to the main logic board
.

이미지 2

이전 이미지가 없습니다

추가