주요 콘텐츠로 건너뛰기

#5 단계의 변경 사항

Joshua Byrne- 에 의해 수정

편집 승인됨 에 의해 Joshua Byrne

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_caution] Warning: When removing or installing a card, handle it only by the edges. Do not touch its connectors or any of the components on the card. Lift the card straight out from the connector to remove it, and insert it straight into the connector to install it. Do not rock the card from side to side and don’t force the card into the slot.
[* black] 1) Release the small locking clip at the front of the card’s logic board connector by pushing the clip up toward the media shelf.
[* black] 2) Holding the card by the top corners, pull up the card and remove it from its expansion slot.

이미지 1

이전 이미지가 없습니다

추가