주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

sheala bacon- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Flip the Apple TV over
-[* black] Peel off the rubber backing which is held on with adhesive. In order to prevent tearing the tape holding the rubber backing in place, be very careful or heat up using a heat gun or hair dryer.
+[* black] Turn the AppleTv so the bottom of the unit is facing up.
+[* black] You need to remove the rubber footing to get access to the screws. Carefully peeling the rubber footing up is the only way to remove it. Use a hairdryer or low temperature heat gun to loosen the glue tape holding the rubber in place.