주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#1단계의 변경 사항

Walter Galan- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* blackicon_reminder] Flip the Apple TV over so that the bottom of the unit is facing up.
[* blackicon_note] You need to remove the rubber base to get access to the screws.
[*

[*
black] Starting at one side of the device, use a hairdryer or low temperaturea heat gun to soften the adhesive holding the rubber base in place.
[*

[* icon_caution] The rubber base will be hot after heating, take extreme while proceeding.
[*
black] While the adhesive is still warm, pull up onpeel the lipbottom of the rubber base upwards to detach it from the metal plate.
[*

[*
black] Continue heating and pulling, slowly,Repeat the procedure described above until you have removed the entire pad.
[* black] Be careful,
rubber can get ripped easily!
[* icon_caution] The pad will be hot; take care not to burn your fingers!
base has been completely removed.
[* blackicon_reminder] Flip the Apple TV over so that the bottom of the unit is facing up.
[* blackicon_note] You need to remove the rubber base to get access to the screws.
[*

[*
black] Starting at one side of the device, use a hairdryer or low temperaturea heat gun to soften the adhesive holding the rubber base in place.
[*

[* icon_caution] The rubber base will be hot after heating, take extreme while proceeding.
[*
black] While the adhesive is still warm, pull up onpeel the lipbottom of the rubber base upwards to detach it from the metal plate.
[*

[*
black] Continue heating and pulling, slowly,Repeat the procedure described above until you have removed the entire pad.
[* black] Be careful,
rubber can get ripped easily!
[* icon_caution] The pad will be hot; take care not to burn your fingers!
base has been completely removed.