주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

#1단계의 변경 사항

Jozsef- 에 의해 수정

편집 거부됨 완료자 Jake Devincenzi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_reminder] Flip the Apple TV over so that the bottom of the unit is facing up.
[* icon_note] You need to remove the rubber base to get access to the screws.
[* black] Starting at one side of the device, use a hairdryerhair dryer or a heat gun to soften the adhesive holding the rubber base in place.
[* icon_caution] The rubber base will be hot after heating, take extreme care while proceeding.
[* black] Starting at one side of the device, use a hairdryerhair dryer or a heat gun to soften the adhesive holding the rubber base in place.
[* icon_caution] The rubber base will be hot after heating, take extreme care while proceeding.
[* black] While the adhesive is still warm, peel the bottom of the rubber base upwards to detach it from the metal plate.
[* black] Repeat the procedure described above until the rubber base has been completely removed.