주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Walter Galan- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* red] You will see the hard drive attached to the metal plate. Unplug the ATA/IDE cable from the logic board to completely separate the metal plate from the logic board.
-[* icon_reminder] Don't forget to reconnect the cable before closing the unit back up, or you will see a flashing ? mark on your TV when you power it up.
+[* black] Carefully pull the hard drive data cable straight up from its socket on the logic board.
+[* icon_reminder] During reassembly, make sure the hard drive data cable is firmly seated in its socket on the logic board. Otherwise, during boot-up you will see a flashing question mark "?".