#4단계의 변경 사항
편집자 Carsten Frauenheim-
편집 승인됨 완료자 Carsten Frauenheim
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Insert the flat end of a spudger into the gap between the back panel and the shell. |
|---|---|
| + | [* black] Insert the flat end of a spudger into the gap between the back panel and the shell, near the left side of the base. |
| [* black] Pull up on the bottom of the back panel to release it from the locking clips. |