주요 콘텐츠로 건너뛰기

#7단계의 변경 사항

Kristen Gismondi- 에 의해 수정

편집 승인됨 완료자 Kristen Gismondi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Flip the keyboard over so that you are looking at the keys.
-[* black] To locate the solder joint on the board count the number of rows down and keys from the right or left side to our broken key/switch.
+[* black] To locate the solder joint on the board, count the number of rows down and keys from the right or left side to the broken key/switch.
[* black] Flip the keyboard over so you can see the solder joints again.
-[* black] Using the number of rows and keys from the left and right count the solder joints which will find the solder joint you need to remove.
-[* icon_note] It is helpful to count from the side that has fewer keys until the broken switch so in this case from right to left. So it is on the second row and 5 keys to the left.
+[* black] Using the number of rows and keys from the left and right, count the solder joints which will find the solder joint you need to remove.
+[* icon_note] It is helpful to count from the side that has fewer keys until the broken switchin this case from right to left (the second row and five keys to the left).