주요 콘텐츠로 건너뛰기

#8단계의 변경 사항

Andrew Raposo- 에 의해 수정

편집 승인됨 완료자 Andrew Raposo

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_reminder] Heat your soldering iron up to 350 degrees celsius.
[* icon_caution] Remember that soldering irons get to hundreds of degrees and you should be careful to not accidentally touch your skin with it as it can cause moderate to severe burns if left long enough.
[* icon_note] The two pins you need to desolder are that you will want to desolder are circled in red as they will be diagonal of each other.
-[* black] At this point, you want to desolder both pins holding the switch. As the solder is being melted you want to use your Desoldering Plunger to remove the solder that has been melted.
+[* black] At this point, you want to desolder both pins holding the switch. As the solder is being melted you want to use your Desoldering Pump to remove the solder that has been melted.