#5단계의 변경 사항
편집자 Ojonukpemi F Ameh-
편집 승인됨 완료자 Ojonukpemi F Ameh
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Replacing bigger keys. If the key you are replacing is a large key, like the caps lock, enter, or space bar key. The process includes these extra steps. |
|---|---|
| + | [* black] Examine the other side of your key cap. You may see metal wires, shaped like half rectangles, attached to holders on the back of your key. My caps lock key has these two for instance. |
| + | [* black] Examine the space your key would enter. There should be metal holders, with little holes in them, protruding from on your keyboard. |
| + | [* black] Align the metals with these holes, they should be positioned so all the metal ends can enter a hole. Starting from the upper metal, insert the metal ends into the holes, and rest the key on the hinge as in previous steps. |
| + | [* black] Push down on the key and properly aligned, your key cap should snap into place with the metals sliding into their holders. |