주요 콘텐츠로 건너뛰기

#4 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip along the right side of the front glass panel.
[* black] Attach a suction cup along the right side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the right edge of the front display glass until it is separated from the display.
[* icon_note] It is helpful to use a guitar pick or another thin plastic object to hold the upper right corner of the display glass up off the display assembly as you work on the left side of the display
.
[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip along the right side of the front glass panel.
[* black] Attach a suction cup along the right side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the right edge of the front display glass until it is separated from the display.
[* icon_note] It is helpful to use a guitar pick or another thin plastic object to hold the upper right corner of the display glass up off the display assembly as you work on the left side of the display
.