주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.
[* black] Attach a suction cup near the upper left corner of the glass display panel.
[* black] Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.
[* icon_note] Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly
.
[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.
[* black] Attach a suction cup near the upper left corner of the glass display panel.
[* black] Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.
[* icon_note] Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly
.