주요 콘텐츠로 건너뛰기

#7 단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip along the left side of the front glass panel.
[* black] Attach a suction cup along the left side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the left edge of the front display glass until it is separated from the display
.
[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip along the left side of the front glass panel.
[* black] Attach a suction cup along the left side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the left edge of the front display glass until it is separated from the display
.