#17단계의 변경 사항
편집자 Faraz Rashid-
편집 승인됨 완료자 Faraz Rashid
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Using a flat tool unclip the cable from the circuit and begin to remove any tape securing any cables. | |
| - | [* black] Lastly, unscrew the single 1.5mm screw on the bottom right of the power input using the Phillips #00 screwdriver to remove the cable. |
| + | [* black] Lastly, unscrew the single 1.5mm Phillips #00 screw on the bottom right of the power input using the Phillips #00 screwdriver to remove the cable. |